Chemical Foam Injector (3/8″ M In/Out)
Achieve Uniform, High-Density Foam Delivery for Professional Cleaning and Valeting
£43.10 inc. VAT
Key Features
Seamless Integration
3/8″ M In/Out Threads: Fits readily into most hose setups, reducing the need for specialised adaptors.
Universal Orientation: Installs on both vertical and horizontal lines for maximum flexibility in different layouts.
Durable Composition
High-Quality Alloys: Built from corrosion-resistant materials to endure repeated contact with cleaning chemicals and moisture.
Long-Term Reliability: Maintains seal integrity and flow consistency under routine or heavy-duty usage.
Optimised Foaming Action
Uniform Dispersion: Merges chemicals with water in a balanced ratio, producing dense foam that clings to surfaces.
Stable Delivery: Preserves consistent concentration and pressure, ensuring uniform coverage over paint, glass, and trims.
User-Friendly Adjustment
Easy Chemical Flow Regulation: Fine-tune foam thickness or chemical strength without complicated procedures.
Minimal Downtime: Quick assembly or disassembly—ideal for frequent product swaps or cleaning tasks.
Professional and Valeting Focus
Compatible with Common Detergents: Works with a broad range of car shampoos, traffic film removers, and foaming agents.
Enhances Vehicle Presentation: Helps produce a show-stopping finish, crucial in upmarket valeting services or display preparations.
Benefits You’ll Appreciate
Increased Efficiency
Time-Saving Action: Dense lather adheres to surfaces, loosening contaminants so they rinse off more easily, reducing manual labour.
Controlled Application: Lower chemical wastage by delivering precisely the foam volume needed.
Superior Consistency
Uniform Mixture: Eliminates patchy coverage often found when manually adding chemicals to water.
Enhanced Results: Even distribution leads to a more professional finish on vehicles and high-visibility surfaces.
Adaptable to Changing Needs
Compact, Flexible Design: Slide it into existing pipelines or reconfigure for new cleaning formulations without reworking an entire system.
Suitable for Various Pressures: Works with moderate or high-pressure flows, accommodating different washers or pumps.
Cost-Effective Maintenance
Low Wear Components: Resilient materials resist corrosion or abrasive chemical damage, cutting down on frequent part replacements.
Reduced Cleanup: Keeping foam primarily contained within the line and target surface mitigates overspray or spillage.
Applications
Car Wash and Valeting
Deep Cleaning: Generate a thick layer of foam that loosens dirt, brake dust, and other stubborn residues.
Pre-Wash Prep: Ideal for pre-soak stages, ensuring every nook and cranny receives detergent coverage.
Commercial and Fleet Maintenance
Equipment Cleansing: Wash down machinery or construction vehicles swiftly, even in harsh settings.
Public Transport: Buses, taxis, or coaches can be rapidly refreshed with dense, easily rinsed foam.
General Cleaning Tasks
Building Exteriors: Lifts grime off walls, signage, and shutters using a dense foam approach.
Garden and Outdoor Furniture: Revives chairs, tables, or decking with less scrubbing, saving time and effort.
How to Use
Pre-Installation Steps
Confirm Hose Compatibility: Ensure your line is set up with matching 3/8″ connectors or adaptors.
Depressurise System: Power off equipment and release residual pressure before connecting the assembly.
Assembly
Attach to Inlet and Outlet: Fit the male threads firmly; apply seal tape if needed for a leak-free bond.
Tighten Appropriately: Avoid over-tightening, which could damage threads or compromise seal integrity.
Regulate Flow
Adjust Chemical Mix: Use the recommended hardware or inline restrictors to set your desired chemical-to-water ratio, if available.
Perform a Quick Check: Run water or solution briefly to test foam output and address any potential leakage.
Post-Operation
Flush the Line: Rinse with clean water to remove leftover chemicals, maintaining top condition.
Store Properly: Inactive lines or hoses should be drained, rolled, and kept away from direct sunlight or corrosive environments.
Safety and Maintenance
General Precautions
Personal Protective Equipment: Depending on chemicals in use, wear gloves and eye shields.
Ventilation: Operate in well-aired areas to dissipate vapours from strong detergents.
Ongoing Care
Inspect Regularly: Look for cracks, rust spots, or compromised seals.
Clean Responsibly: Wash away chemical residues—this prolongs service life and upholds performance standards.
Environmental Considerations
Proper Disposal: In case of irreparable damage, follow local regulations when discarding metal parts or hoses.
Eco-Conscious Use: Adjust foam concentration to prevent chemical runoff into drains or the environment unnecessarily.
Order Yours Today
Enhance your foam application process with this Stainless Steel Chemical Injector, featuring two 3/8″ M in/out ports designed for streamlined in-line installation. Embrace precision, consistent foam coverage, and minimal product overspill—vital for modern car wash or valeting facilities aiming to deliver an immaculate finish.
Boost your cleaning efficiency—acquire this compact but mighty in-line foam regulator now and experience professional-grade results.
Additional Information
Customer Reviews
“A must-have for controlling foam thickness. Our workshop’s pre-rinse has never been more uniform!” – Dean, Automotive Detailer
“Simple to install and ensures we don’t waste expensive detergent. Really nice piece of kit.” – Tanya, Valeting Professional
Complementary Items
High-Pressure Washers: Achieve comprehensive cleaning by coupling the injector with robust washers.
Quality Hoses & Clamps: Ensure a snug fit and leak-resistant operation throughout your system.
SEO Keywords
Chemical Foam Injector
3/8″ M in/out Foam Valve
Stainless Steel Foam Regulation
In-Line Foam Regulator
Car Wash Foaming Solution
Automotive Detailing Injector
High-Pressure Foam Injection
Valeting Chemical Delivery
Industrial Foam Dispenser
Professional Car Wash Accessories
